210-065 vce - IT Certification Exam Questions and Answers, 100% Actual & Verified

[High Quality Materials] Cisco CCNA Collaboration 210-065 Dumps Exam Materials And Youtube Free Shared

High quality Cisco CCNA Collaboration 210-065 dumps exam training resources and study guides free download from leads4pass. The best useful Cisco CCNA Collaboration 210-065 dumps pdf materials and vce youtube demo free shared. “Implementing Cisco Video Network Devices v1.0” is the name of Cisco CCNA Collaboration https://www.leads4pass.com/210-065.html exam dumps which covers all the knowledge points of the real Cisco exam. Latest Cisco CCNA Collaboration 210-065 dumps exam practice questions and answers free update, pass Cisco 210-065 exam test easily at first try.

The best and most useful Cisco 210-065 dumps pdf materials: https://drive.google.com/open?id=0B_7qiYkH83VRODRqVmVBYWxuc0k

The best and most useful Cisco 210-260 dumps pdf materials: https://drive.google.com/open?id=0B_7qiYkH83VRcnI0SE83bHBvQ1k
210-065 dumps
QUESTION 1
When configuring the Cisco TelePresence System 500 with a static IP address, where should the IP address be configured?
A. in Cisco Unified Communications Manager after adding the Cisco TelePresence System 500 manually
B. in the Cisco TelePresence System Administration tool
C. in the Cisco TelePresence Management Suite after the Cisco TelePresence System 500 was added under systems
D. Static IP address configuration is not possible. Only a DHCP-provided IP address is supported.
E. using the on-screen display
Correct Answer: B

QUESTION 2
A customer requests a configuration that enables users to easily add a third party to an existing call. The environment contains only three Cisco TelePresence C40 codecs and one Cisco VCS. To achieve the customer\’s requirements, which feature should be added?
A. Cisco MultiWay
B. Cisco TelePresence Conductor
C. Cisco TMS
D. Cisco Multisite
E. Cisco VCS Expressway
Correct Answer: D

QUESTION 3
Refer to the exhibit.

Which CLI command should be run to resolve these alarms on a Cisco VCS? 210-065 dumps
A. xcommand DefaultValuesSet
B. xconfiguration DefaultLinksAdd
C. xcommand DefaultLinksAdd
D. xconfiguration DefaultValuesSet
Correct Answer: C

QUESTION 4
Which Cisco Video Surveillance product contains the Cisco Video Surveillance Encoding Server?
A. Video Communications Server
B. Cisco Video Surveillance Operations Manager
C. Cisco Video Surveillance Media Server
D. Cisco Video Surveillance Transcoding and Encoding Server
E. Cisco Video Surveillance Virtual Matrix
Correct Answer: B

QUESTION 5
When you configure a zone for firewall traversal, which type of zone is the Cisco VCS-C configured for?
A. client
B. server
C. proxy
D. gateway
E. neighbor
Correct Answer: A

QUESTION 6
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which two steps are required as part of this process? (Choose two.)
A. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
B. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
C. Connect the Touch 8 controller to the secondary network adapter on the Cisco TelePresence SX20.
D. Reboot the Cisco TelePresence SX20.
E. Hold the mute button down for 20 seconds while you power on the Touch 8 controller.
Correct Answer: CE

QUESTION 7
Refer to the exhibit.

When the administrator clicks the ticket number of any of the open tickets, which two actions are presented to the administrator? 210-065 dumps (Choose two.)
A. ignore ticket
B. acknowledge ticket
C. delete ticket
D. close ticket
E. escalate ticket
Correct Answer: AB

QUESTION 8
You are checking a DHCP server configuration for video endpoints. What is the role of option 150 in the configuration?
A. It is the NTP server IPv4 address.
B. It is not necessary to specify the role of option 150.
C. It is the TFTP server IPv4 address.
D. It is the TFTP server IPv6 address.
Correct Answer: C

QUESTION 9
A technician is trying to pair a Touch 8 with a Cisco TelePresence SX20 endpoint, but the codec is not automatically listed in the touch panel. What are two possible reasons for this behavior? (Choose two.)
A. The codec firmware version is below version TC 6.1.
B. The codec and the Touch 8 are on separate subnets.
C. Pairing visibility mode is not active on the codec.
D. The codec is not compatible with a Touch 8 device.
E. The Touch 8 is connected via the second Ethernet port on the codec.
Correct Answer: BC

QUESTION 10
A customer owns three Codian 5300 MCUs with several video endpoints. Users complain that they are getting multipoint control unit port capacity errors when scheduling video conferences in Cisco TMS. What can be done to correct these errors automatically?
A. Enable the Automatic MCU Cascading option in the Cisco TMS Conference Settings.
B. Install a Cascading option key on the Cisco TMS server.
C. Install a Cisco TelePresence Conductor server.
D. Install cascaded multipoint control units.
Correct Answer: C

QUESTION 11
Which three of these are functions of the Cisco TelePresence Management Suite? (Choose three.)
A. automatic software update and release keys
B. intelligent call routing engine
C. provisioning a Cisco TelePresence System endpoint
D. tracing SIP and H.323 calls
E. managing phonebooks for endpoints that are registered to the Cisco Unified Cisco Unified Communications Manager
F. rebooting endpoints that are registered to the Cisco TelePresence Video Communications Server
Correct Answer: ABF

QUESTION 12
Which bridge solution requires Cisco TelePresence Conductor? 210-065 dumps
A. Cisco TelePresence Server operating in remotely managed mode
B. Cisco TelePresence Server operating in locally managed mode
C. Cisco TelePresence MCU operating in remotely managed mode
D. Cisco TelePresence MCU operating in locally managed mode
Correct Answer: A

High quality Cisco CCNA Collaboration https://www.leads4pass.com/210-065.html dumps pdf training resources which are the best for clearing 210-065 exam test, and to get certified by Cisco CCNA Collaboration.

High quality Cisco CCNA Collaboration 210-065 dumps vce youtube demo: https://youtu.be/rWZzQKxnlJQ

2017 Best And Latest Cisco Practice PDF For 210-065 Exam Test

Preparation with the VCE 210-065 exam study material would increase the probability to pass the exam successfully in the very first attempt. Our Cisco 210-065 practice tests cover the entire outline for Cisco syllabus and make your knowledge fully compatible with 210-065 objectives. All core topics are covered in our latest 210-065 dumps comprehensively, and we Provide 210-065 free update in a year.

210-065

QUESTION 1
A technician has installed and powered on a Cisco TelePresence MCU 5320 and is connected via the console port. The 210-065 technician needs to determine the IP settings that were automatically assigned via DHCP. Which command should be entered?
A. xstatus
B. show network eth0
C. status
D. help static
Correct Answer: C

QUESTION 2
The firmware for the primary codec of a Cisco TelePresence System 3010 is being upgraded. Which codec CLI command 210-065 could be used to check on the progress of the update?
A. utils upgrade display
B. utils system version
C. show upgrade detail
D. show system upgrade
Correct Answer: C

QUESTION 3
A Cisco 210-065 vce TelePresence VCS displays this alarm: “Root password is set to default.” How can this security warning be addressed?
A. Use the Cisco TelePresence VCS web user interface, choose Administration > User Settings, and change the root password.
B. Use SSH to log in to the Cisco TelePresence VCS as Administrator and issue the command xconfig root set passwd.
C. Use SSH to log in to the Cisco TelePresence VCS as Root, issue the command set password, and enter the new password when prompted.
D. Use SSH to log in to the Cisco TelePresence VCS as Root, issue the command passwd, and enter the new password when prompted.
E. Use the Cisco TelePresence VCS web user interface, choose Administration > System Settings, and change the root password.
Correct Answer: D

QUESTION 4
A large company wants to procure video conference devices that allow multipoint conferences from C-Series and immersive endpoints that are registered to a Cisco VCS and Cisco 210-065 pdf Unified Communications Manager. Which two components meet the requirements of this company? (Choose two.)
A. Cisco TelePresence Multipoint Switch registered to Cisco VCS
B. Cisco C-Series endpoint with a multisite option key registered to Cisco VCS
C. Cisco TelePresence Server registered to Cisco VCS
D. Cisco C-Series endpoint with a multisite option key registered to Cisco Unified Communications Manager
E. Cisco TelePresence Multipoint Switch trunked to Cisco Unified Communications Manager
Correct Answer: CE

QUESTION 5
A video conference user that is connected via a Cisco 210-065 TelePresence Codec C40 to a conference that is hosted on a Cisco 210-065 TelePresence MCU 5300 would like to switch the local layout view. Which two options describe how to switch the local layout view without affecting the view of remote users? (Choose two.)
A. Use the Administrator settings from the local touch control.
B. Use the Participant settings from the MCU 5300 web interface.
C. Use the Call settings from the remote control.
D. Use the Call Control settings from the codec web interface.
E. Use the Conference settings from the codec web interface.
Correct Answer: BD

Reference: http://www.passitdump.com/210-065.html

Learn more: https://www.examfast.com/the-best-microsoft-070-414-cert/