The newly updated Lead4Pass 350-401 exam dumps contain 863 exam questions and answers, and candidates can take the Cisco 350-401 ENCOR exam in September and beyond, guaranteeing a successful first attempt.
Welcome to download the latest 350-401 exam dumps: https://www.leads4pass.com/350-401.html, with PDF files and VCE exam engine to help you study all exam questions easily.
PS.
Lead4Pass 350-401 dumps PDF example image:
Lead4Pass 350-401 dumps VCE example image:
Free to share some 350-401 dumps PDF online download:https://drive.google.com/file/d/1ahrnRyvF4ubbTamp6ejufmuvDDV3xA_H/
You can verify the latest 350-401 dumps exam questions and answers online:
NEW QUESTION 1:
Refer to the exhibit.
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as an entry point. Assuming that all BGP
neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which
configuration accomplish task?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: A
NEW QUESTION 2:
DRAG DROP
Drag and drop the snippets onto the blanks within the code to construct a script that advertises the network prefox
192.168.5.0 session. Not all options are used.
Select and Place:
Correct Answer:
NEW QUESTION 3:
In which two ways does the routing protocol OSPF differ from EIGRP? (Choose two.)
A. OSPF supports an unlimited number of hops. EIGRP supports a maximum of 255 hops.
B. OSPF provides shorter convergence time than EIGRP.
C. OSPF is distance vector protocol. EIGRP is a link-state protocol.
D. OSPF supports only equal-cost load balancing. EIGRP supports unequal-cost load balancing.
E. OSPF supports unequal-cost load balancing. EIGRP supports only equal-cost load balancing.
Correct Answer: AD
NEW QUESTION 4:
An engineer is configuring a new SSID to present users with a splash page for authentication. Which WLAN Layer 3
setting must be configured to provide this functionally?
A. CCKM
B. WPA2 Policy
C. Local Policy
D. Web Policy
Correct Answer: C
https://mrncciew.com/2013/03/21/wlc-web-authentication/
NEW QUESTION 5:
Refer to the exhibit. An engineers reaching network 172 16 10 0/24 via the R1-R2-R4 path. Which configuration forces
the traffic to take a path of R1-R3-R4?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D
NEW QUESTION 6:
Refer to the exhibit.
An engineer is configuring an EtherChannel between Switch1 and Switch2 and notices the console message on
Switch2. Based on the output, which action resolves this issue?
A. Configure less member ports on Switch2.
B. Configure the same port channel interface number on both switches
C. Configure the same EtherChannel protocol on both switches
D. Configure more member ports on Switch1.
Correct Answer: C
In this case, we are using your EtherChannel without a negotiation protocol on Switch2. As a result, if the opposite
switch is not also configured for EtherChannel operation on the respective ports, there is a danger of a switching loop.
The EtherChannel Misconfiguration Guard tries to prevent that loop from occuring by disabling all the ports bundled in the EtherChannel.
NEW QUESTION 7:
Which protocol is used to encrypt control plane traffic between SD-WAN controllers and SDWAN endpoints?
A. DTLS
B. IPsec
C. PGP
D. HTTPS
Correct Answer: A
DTLS protocol is used to encrypt control plane traffic between vSmart (controllers) and other SD-WAN endpoints.
NEW QUESTION 8:
Which command set configures RSPAN to capture outgoing traffic from VLAN 3 on interface GigabitEthernet 0/3 while ignoring other VLAN traffic on the same interface?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B
NEW QUESTION 9:
Refer to the exhibit.
Cisco DNA Center has obtained the username of the client and the multiple devices that the client is using on the
network. How is Cisco DNA Center getting these context details?
A. The administrator had to assign the username to the IP address manually in the user database tool on Cisco DNA
Center.
B. Those details are provided to Cisco DNA Center by the Identity Services Engine
C. Cisco DNA Center pulled those details directly from the edge node where the user connected.
D. User entered those details in the Assurance app available on iOS and Android devices
Correct Answer: C
Features of the Cisco DNA Assurance solution includes Device 360 and client 360, which provides a detailed view of
the performance of any device or client over time and from any application context. Provides very granular
troubleshooting in seconds.
NEW QUESTION 10:
Which two descriptions of FlexConnect mode for Cisco APs are true? (Choose two.)
A. APs that operate in FlexConnect mode cannot detect rogue APs.
B. When connected to the controller, FlexConnect APs can tunnel traffic back to the controller.
C. FlexConnect mode is used when the APs are set up in a mesh environment and used to bridge between each other.
D. FlexConnect mode is a feature that is designed to allow specified CAPWAP-enabled APs to exclude themselves from
managing data traffic between dents and infrastructure.
E. FlexConnect mode is a wireless solution for branch office and remote office deployments.
Correct Answer: BE
NEW QUESTION 11:
DRAG DROP
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Select and Place:
Correct Answer:
NEW QUESTION 12:
Which statement about a fabric access point is true?
A. It is in local mode an must be connected directly to the fabric border node.
B. It is in FlexConnect mode and must be connected directly to the fabric border node.
C. It is in local mode an must connected directly to the fabric edge switch.
D. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
Correct Answer: C
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality
of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs
join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration
events, including RLOC assignment via the fabric WLC. The fabric edge nodes use CDP to recognize APs as special
wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common
EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP
infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
NEW QUESTION 13:
Refer to the exhibit.
After an engineer configures an EtherChannel between switch SW1 and switch SW2, this error message is logged on
switch SW2.
Based on the output from SW1 and the log message received on Switch SW2, what action should the engineer take to
resolve this issue?
A. Configure the same protocol on the EtherChannel on switch SW1 and SW2.
B. Connect the configuration error on interface Gi0/1 on switch SW1.
C. Define the correct port members on the EtherChannel on switch SW1.
D. Correct the configuration error on interface Gi0/0 switch SW1.
Correct Answer: A
In this case, we are using your EtherChannel without a negotiation protocol. As a result, if the opposite switch is not also configured for EtherChannel operation on the respective ports, there is a danger of a switching loop. The EtherChannel Misconfiguration Guard tries to prevent that loop from occuring by disabling all the ports bundled in the EtherChannel.
…
Download the above 350-401 dumps exam questions and answers:https://drive.google.com/file/d/1ahrnRyvF4ubbTamp6ejufmuvDDV3xA_H/
Download the latest 350-401 dumps now: https://www.leads4pass.com/350-401.html, with the always-active discount code “lead4pass2020” for a 12% discount.